bonaventuregaspesie.com

Pro Micro ATmega32U4 3.3V 5V Module Board for Arduino – diymore

4.9 (255) · € 7.00 · En Stock

The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board.The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.This tiny little board does all of the neat-o for Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx.Running at 16MHz and 5V, this board will remind you a lot of your other favorite for Arduino-compatible boards but this little guy can go just about anywhere.There is a voltage regulator on board so it can accept voltage up to 9VDC. If you're supplying unregulated power to the board,be sure to connect to the "RAW" pin on not VCC.This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.Features:ATMega 32U4 running at 5V/16MHzSupported under For Arduino IDE v1.0.1On-Board micro-USB connector for programming12 x Digital I/Os (5 are PWM capable)Rx and Tx Hardware Serial ConnectionsOur Smallest For Arduino-Compatible Board Yet!Size: 3.5X2X0.4 CM (1.38X0.79X0.16 inch).NOTE:The headers is not soldered on board, you have to solder it by youselfPackage Included:1PCS * Diymore Pro Micro ATmega32U4  Development board
The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board.
The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.
This tiny little board does all of the neat-o for Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx.
Running at 16MHz and 5V, this board will remind you a lot of your other favorite for Arduino-compatible boards but this little guy can go just about anywhere.
There is a voltage regulator on board so it can accept voltage up to 9VDC.
If you're supplying unregulated power to the board,be sure to connect to the RAW pin on not VCC.
This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.
We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.

Features:

ATMega 32U4 running at 5V/16MHz
Supported under For Arduino IDE v1.0.1
On-Board micro-USB connector for programming
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Our Smallest For Arduino-Compatible Board Yet!
Size: 3.5X2X0.4 CM (1.38X0.79X0.16 inch).

NOTE:

The headers is not soldered on board, you have to solder it by youself

Package Included:

1PCS * Diymore Pro Micro ATmega32U4  Development board

Arduino Pro Micro 5v

Pro Micro - 5V/16MHz - DEV-12640 - SparkFun Electronics

Buy Pro Micro - 5V/16MHz - Atmega32u4 module - Botland - Robotic Shop

diymore DM Strong Series Pro Micro Atmega32u4 Atmega32u4-AU Microcontroller Module for Arduino - AliExpress

ATMEGA328P ATMEGA32U4 ESP8266 ESP8285 CH340G CH340 WIFI 3.3V 5V Pro Mini Micro USB For Arduino Nano V 3.0 Strong Series 5 Kinds - Price history & Review, AliExpress Seller - Worldchips

Pro Micro ATmega32U4 5V 16MHz Board Module Replace Pro Mini ATmega328 4 Channels Microcontroller With Pins Header For Arduino - Price history & Review, AliExpress Seller - ElectronicFans

Diymore Pro Micro,Atmega32U4 Pro Micro Type C Development Board 5V 16MHz with

Pro Micro ATmega32U4 Mega32U4 3.3V 8MHz Module Usb Controller Board For Arduino Nano With The Bootloader ATMEGA32U4-AU Module - AliExpress

Buy diymore 5PCS Mini USB ATmega32U4 Pro Micro 5V 16MHz Board Module Replace Pro Mini Online at desertcartOMAN

Qwiic Pro Micro USB-C (ATmega32U4) Hookup Guide - SparkFun Learn

Uno - Using 5v and 3.3v pins at the same time? - General Electronics - Arduino Forum

OSOYOO 3pcs ProMicro Board ATmega32U4 Leonardo 5V/16MHz Module Board Type C Port for Arduino : Electronics