The communications standard "DMX512" covers digital multiplexed signals. It is the most common communications standard used by lighting and related stage equipment. DMX512 provides up to 512 control "channels" per data link. Each of these channels was originally intended to control lamp dimmer levels. You can think of
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors

Assembled in Dallas, TX by Custom Cable Connection

Pinout

Tip : Red

Ring : Blue

Shield : Shield

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.

Typical Applications:

Audio connections between multimedia devices.

Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.

Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc

Features:

2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire

3.5mm Male Stereo Solder Plug, Nickel plated with strain relief

1/4 Plug with 3 Conductor Nickel Shell Solder Contacts

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210

24-gauge bare copper conductors

Connectors: XLR Male Plug to XLR Female Jack

Rugged Nickel Plated XLR Connectors with Strain Relief

Neutrik NC3MXX and NC3FXX Connectors

Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Neutrik Connectors: NP3RX and NYS228

Assembled in Dallas, TX by Custom Cable Connection

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

The communications standard DMX512 covers digital multiplexed signals. It is the most common communications standard used by lighting and related stage equipment. DMX512 provides up to 512 control channels per data link. Each of these channels was originally intended to control lamp dimmer levels. You can think of it as 512 sliders on a lighting console, connected to 512 light bulbs.

Pinout

Pin 1: Shield (ground)

Pin 2: Primary Data Complement (-)

Pin 3: Primary Data True (+)

Pin 4: Optional Secondary Data Complement (-)

Pin 5: Optional Secondary Data 2 True (+)

We use DMX 110ohm Digital 2 Pair Shielded 24Awg Cable.

Shield Coverage: 95%

Jacket: Matte PVC

O.D.: 0.29

Straight Through Pinout

1- Shield

2- Black

3- White

4- Red

5- Green

Neutrik NC5FX-TOP 5 pole female XLR connector - Belram

Neutrik DMX XLR Cable 10 m 3-Pin Microphone Cable AES/EBU DJ 110

1 Foot 5-Pin XLR 24 AWG (Gauge) DMX512 Data Cable Male

Adam Hall Cables 4 STAR CATBOX XF5 - Audio & DMX, AES/EBU adapter

Sommer Carbokab (Multi Screen) Microphone Lead - Neutrik Gold XLR

5 FT - Mogami 3080 DMX 3 PIN Stage Light & DJ Lighting Cable

The communications standard DMX512 covers digital multiplexed signals. It is the most common communications standard used by lighting and related

5-Pin XLR Right Angle to Right Angle DMX AES/EBU Digital Audio/Data Mic Cables

Castline Gold AES/EBU XLR Digital Audio Cable 110 Ohm

DMX cable by premium manufacturer Sommer CableThese premade cables are the perfect choice for the transmission of the 110 ohms Aes/Ebu Dmx512 data format.Important note: the use of a standard microphone cable is not recommended due to data and information losses (caused by the skin effect).

SOMMER Cable DMX Cable XLR 3pin 1.5m bk Neutrik

Belden Balanced Lead. Low Capacitance Mic Cable. Female to Male

Sommer cable Shop Aes / ebu / dmx512 Binary 234 AES/EBU MKII, 2