bonaventuregaspesie.com

T-88 Structural Epoxy Adhesive - System Three Resins

5 (765) · € 18.99 · En Stock

T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions.

Description T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive

System Three T-88

System Three T-88 Epoxy Adhesive, 0.5 Pt Bottle, Amber: Epoxy

Note: Two part system, quantities will be combined amount of part A and part B. For example, for the gallon size, part A will be 1/2 gallon and part B

T-88 Structural Adhesive

Epoxy 101: 50ml Cartridge - Priming and Using

Blade Pro Epoxy Adhesive is a two-component, high-performance glue designed specifically for the knife maker. This state of the art adhesive forms super tough, flexible bonds to wood, Micarta, G10, and other composites. Tenacious bonds are developed to non-ferrous metals, as well as stainless, and carbon steel. Blade Pro Epoxy Adhesive is low in viscosity and is easy to spread. Because of its lower viscosity, it is suitable for both full and hidden tang applications.

System Three T32606 - Blade Pro Epoxy Adhesive, 4 oz. Kit

For well over 25 years T-88 has been the most widely used structural adhesive for marine and general woodworking use in the United States. Mixed at a 1:1 by volume ratio, T-88 will cure at temperatures as low as 35oF. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. T-88 is unique in that it may be applied to damp wood, provided it is worked well into the surface.

System Three 1100K90 Amber T-88, 50 ml Cartridge, 1.69 oz. Bottle

For over 35 years, G-2 has been an excellent epoxy adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight.

System Three G-2 Epoxy Glue Kit, 12 oz.

System Three 1100K14 Amber T-88 Kit, 1 Pint Bottle

System Three 1100K20 Amber T88 Kit, 0.5 Gal Bottle