Accueil
atomstack a10
ATOMSTACK A10 Pro 50W Engraver Machine,10W Optical Power Ultra Fine Engraving Master with Fixed-Focus Compressed Spot

ATOMSTACK A10 Pro 50W Engraver Machine,10W Optical Power Ultra Fine Engraving Master with Fixed-Focus Compressed Spot

4.8 (85) · € 323.50 · En Stock

Arrives by Sat, Feb 10 Buy ATOMSTACK A10 Pro 50W Engraver Machine,10W Optical Power Ultra Fine Engraving Master with Fixed-Focus Compressed Spot at
Specification:
Item Model NO.: ATOMSTACK A10 PRO
Print Size: Recommend 410*400mm
Carving Objects: Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective
Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting Objects: Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge;
Laser Power: 50W
Laser Output Power: 10-11W
Wave Length: 445 ± 5nm
Engraving Accuracy: 0.01mm
Focusing Method: Fixed focus laser, no need to focus
Laser Protective Cover: Protect the user's eyes and prevent pets from grabbing the laser spot. Operating Software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format: NC, BMP, JPG, PNG, DXF, etc.
Data Transmission Method: USB connection.
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC12V, 5A
Certification: CE, FCC, RoHS, FDA, PSE
Weight & Dimensions:
Package Content:
1 × X-axis Rail 1 × 57cm Y-axis Left Slide Rail 1 × 57cm Y-axis Right Slide Rail 2 × 48cm Support Beam 1 × Control Box 3 × Foot Bracket 1 × Laser Head 1 × Connecting Plate 1 × 24V 2A Power Adapter 1 × Power Cable 1 × USB Cable 1 × USB Card and Card Reader 1 × HDMI Cable Step 1~5 Installation Package: 1 × Mounting Screws 1 × Toolkit 10 × Synchronous Belt 3 × Wood Chips 1 × Fixed Focus Film 1 × Wire Tire 1 × Brush 3 × Acrylic Sheet 1 x Metal Mat Board 1 x Dust-free Cloth 1 × Product Manual
Note: ● When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. ● Please do not touch the laser emitter with your hand, or it may burn your hand. ● Please avoid strong impact on the machine. ● Children under 14 are not allowed to use this product and children over 14 need adult supervision. ● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.