Outdoor Double Sided Tape

4.8 (572) · € 8.50 · En Stock

Hoselink's Outdoor Acrylic Double Sided Tape is an ideal solution for rental properties and semi-permanent fixtures. Perfect for Hoselinks new range of solar lighting however can be used for various fixtures including door numbers, plastic shelving and decorations. 10 feet long and holds up to 11lbs!
Hoselink's Outdoor Acrylic Double Sided Tape is an ideal solution for rental properties and semi-permanent fixtures. Perfect for Hoselinks range of solar lighting, the tape can be used for various fixtures including door numbers, plastic shelving and decorations. Recommended Surfaces: Wood, Metal, Concrete, Brick, Gyprock, Tiles, Acrylic. UV, temperature and humidity resistant. This versatile double sided clear acrylic tape will withstand a wide range of climatic conditions due to being waterproof once bonded to surface. We recommend using 2 strips the full length of the back of the light, particularly on larger models.Holds up to 11lb. 10 feet long, 3/4 wide. The tape can be difficult to remove, and often leaves a sticky residue behind. However with the right technique, it can be removed cleanly from most surfaces. Make sure to use extra care when removing the tape from painted areas. Step 1Use a heat gun or hair dryer to warm the surfaces that are taped together. This will loosen the bond of the tape. Heat just until the surface is hot to the touch.Step 2Carefully pull the taped surfaces apart. Attempt to remove the tape by grasping the edge of it with your fingers and pulling away from the surface. Remove as much tape as possible using this method. Step 3Use a razor blade to carefully scrape off any leftover sections of tape and residue. Take care not to scratch painted surfaces, because this could cause permanent damage.Step 4If any glue residue remains, apply a solvent adhesive remover per the manufacturer's instructions.