SUNLU 3D Printer Resin, 1KG ABS-Like Fast Curing Strong 3D Resin
4.9 (250) · € 16.50 · En Stock
Arrives by Fri, Feb 16 Buy SUNLU 3D Printer Resin, 1KG ABS-Like Fast Curing Strong 3D Resin for LCD DLP SLA Resin 3D Printers, 395 - 405nm UV Light Curing Photopolymer Resin, Non Brittle, High Precision, 1000g, Black at
SUNLU ABS-Like Photopolymer Rapid 3D Printer Resin, 405nm UV-Curing ABS-Like Photopolymer Rapid Resin for LCD/DLP/SLA 3D Printing, Non-Brittle & High Precision
Packing Listing
- A bottle of 1KG resin & Resin filters for 3d printer
Resin Storage Tips
- Please store away from sunlight, as sunlight contains ultraviolet rays which will cure the photosensitive resin.
- It is recommended to store the resin in a cool dry place at 15-35°C. Resin viscosity will become higher when the temperature gets lower.
- Please keep it sealed to avoid dust or moisture affecting the print quality.
Cautions
- Usage period: use within one year for best results.
- This product is not edible, if swallowed by mistake, please seek medical attention immediately.
- Please shake well before use, it is recommended to shake upside down for three times.
- Wear gloves, protective masks and other protective equipment when using photosensitive resin.
- Please clean the printed resin model with high-concentration alcohol for about 30S. It is recommended to use 95% concentration of alcohol or more to clean the printed mode
- In order to obtain better results, the cleaned(alcohol has dried) model can be secondarily cured.
- To avoid contamination of the resin, do not pour the resin in the container into the unused resin.
JAYO UV Resin ABS Like/Standard/Plant based/Nylon Like/Water-Wash
Bio Resinsunlu 3d Resin 1kg/2kg/3kg - Water Washable, Fast Curing
SUNLU ABS-Like Resin 10KG UV 405nm Photopolymer LCD Printer Liquid
SUNLU Plant Based Resin, Non Toxic Resin USA / Gray 1000g
【SUNLU Fast Curing ABS-Like Resin】SUNLU ABS-Like photopolymer resin will fast cure when it absorbs 405nm UV light (UV radiation) from a resin printer
SUNLU 1KG ABS-Like 3D Printer Resin, Fast Curing Strong 405nm Photopolymer Resin for LCD/DLP/SLA 3D Printer, Non Brittle, High Precision, Low
3D Printer Resin 405nm UV Curing Rapid Resin 1000g Standard Photopolymer Fast
【1kg *1 Pack Dark Grey+ 1kg *2 Packs Clear Red
SUNLU 3D Printer Resin Bundle Multicolor, ABS Like Resin for 4K 8K
SUNLU 3D Printer Resin 1KG Standard/ABS-Like/Plant-Based/Water
SUNLU ABS Like Resin 405nm Photopolymer Resin
SUNLU 2 KG*2 Bottles ABS-Like 3D Printer Resin, 405nm
